Wind Turbine Payback in Waupaca County, WI
Wind turbine payback in Waupaca County
No. The turbine wears out before it pays for itself.
At 30 m, the height a home turbine tower usually reaches, the wind in Waupaca County, WI averages 6.01 m/s (13.4 mph). A 10 kW turbine there would make about 19,778 kWh a year, worth $3,768 at WI's 19.05¢/kWh. Against an installed cost of about $100,000, that is a payback of 27 years, and the turbine is built to last about 20.
What to do in Waupaca County
A home turbine is not worth buying for savings in Waupaca County unless your spot is far windier than the county average, 6.9 m/s at the hub against 6.01 m/s here. Per kW, solar panels would make about 1,113 kWh a year here against the turbine's 1,978, so get a solar quote first.
What would have to change
- Power would have to cost 25¢/kWh, 1.3 times what WI pays now.
- Or the average wind at the hub would have to be 6.9 m/s instead of 6.01. A taller tower or an exposed ridge can add some of that; a rooftop never will.
Against the rest of WI
Waupaca County is the 826th windiest of 3,144 US counties at turbine height; the national middle is 4.79 m/s. The windiest in WI is Manitowoc County at 7.32 m/s, payback 18 years.
Month by month in Waupaca County
January is the strongest month here, at 6.56 m/s and about 2,023 kWh. August is the weakest, 5.01 m/s and 1,072 kWh, so the best month makes 1.9 times the worst. November to March brings in 48% of the year's output in Waupaca County.
| Month | Wind at 30 m | Output | Worth |
|---|---|---|---|
| January | 6.56 m/s | 2,023 kWh | $385 |
| February | 6.72 m/s | 1,922 kWh | $366 |
| March | 6.39 m/s | 1,916 kWh | $365 |
| April | 6.64 m/s | 2,006 kWh | $382 |
| May | 5.93 m/s | 1,630 kWh | $311 |
| June | 5.35 m/s | 1,231 kWh | $235 |
| July | 5.02 m/s | 1,077 kWh | $205 |
| August | 5.01 m/s | 1,072 kWh | $204 |
| September | 5.70 m/s | 1,437 kWh | $274 |
| October | 6.33 m/s | 1,883 kWh | $359 |
| November | 6.30 m/s | 1,800 kWh | $343 |
| December | 6.30 m/s | 1,860 kWh | $354 |
What a taller tower would buy
Measured at 10 m the wind in Waupaca County averages 4.7 m/s; at 50 m it is 6.74 m/s. That gives a shear exponent of 0.224, typical of ordinary open country. Going from 20 m to 50 m takes output from 15,960 to 25,166 kWh a year, 58% more, before counting the extra cost of the taller tower. Why tower height decides it explains the shear behind these numbers.
| Hub height | Average wind | Output | Payback |
|---|---|---|---|
| 20 m | 5.49 m/s | 15,960 kWh | 33 years |
| 30 m | 6.01 m/s | 19,788 kWh | 27 years |
| 40 m | 6.41 m/s | 22,753 kWh | 23 years |
| 50 m | 6.74 m/s | 25,166 kWh | 21 years |
Counties around Waupaca County
3 of the 6 closest counties are windier at turbine height; the windiest, Winnebago County, averages 6.12 m/s.
- Shawano County, WI: 5.94 m/s, 19,260 kWh, payback 27 years (24 mi)
- Outagamie County, WI: 6.01 m/s, 19,778 kWh, payback 27 years (25 mi)
- Portage County, WI: 6.07 m/s, 20,223 kWh, payback 26 years (26 mi)
- Waushara County, WI: 6.06 m/s, 20,149 kWh, payback 26 years (29 mi)
- Winnebago County, WI: 6.12 m/s, 20,594 kWh, payback 26 years (31 mi)
- Menominee County, WI: 5.94 m/s, 19,260 kWh, payback 27 years (38 mi)
Sun versus wind in Waupaca County
Waupaca County gets 3.81 kWh of sunshine per square metre a day on average. One kW of solar panels here would make roughly 1,113 kWh a year; one kW of the turbine above makes 1,978. This is one of the rare places where a kilowatt of turbine out-produces a kilowatt of panels, by 1.8 times. Panel output assumes an 80% system performance ratio. Wind or solar runs the same comparison for every county.
How this is worked out
Wind is NASA's Power climate record, the 2001-2025 average at 10 m and 50 m for the county's centre, carried to 30 m with this county's own measured wind shear and spread into hours with a Rayleigh distribution. The turbine is a generic 10 kW, 7 m rotor machine with 10% losses. Cost is $10,000 per kW installed with no tax credit, because the federal one ended in 2025. One county-centre number cannot see your hilltop or your tree line, so treat it as the starting point for a site survey, not a substitute. The full method and its weak spots are in how the numbers are made.