Wind Turbine Payback in Ramsey County, ND
Wind turbine payback in Ramsey County
No. The turbine wears out before it pays for itself.
At 30 m, the height a home turbine tower usually reaches, the wind in Ramsey County, ND averages 6.53 m/s (14.6 mph). A 10 kW turbine there would make about 23,628 kWh a year, worth $2,944 at ND's 12.46¢/kWh. Against an installed cost of about $100,000, that is a payback of 34 years, and the turbine is built to last about 20.
What to do in Ramsey County
A home turbine is not worth buying for savings in Ramsey County unless your spot is far windier than the county average, 9.1 m/s at the hub against 6.53 m/s here. Per kW, solar panels would make about 1,130 kWh a year here against the turbine's 2,363, so get a solar quote first.
What would have to change
- Power would have to cost 21¢/kWh, 1.7 times what ND pays now.
- Or the average wind at the hub would have to be 9.1 m/s instead of 6.53. A taller tower or an exposed ridge can add some of that; a rooftop never will.
Against the rest of ND
Ramsey County is the 165th windiest of 3,144 US counties at turbine height; the national middle is 4.79 m/s. The windiest in ND is Bowman County at 6.79 m/s, payback 31 years.
Month by month in Ramsey County
October is the strongest month here, at 7.05 m/s and about 2,329 kWh. July is the weakest, 5.73 m/s and 1,503 kWh, so the best month makes 1.5 times the worst. November to March brings in 43% of the year's output in Ramsey County.
| Month | Wind at 30 m | Output | Worth |
|---|---|---|---|
| January | 6.63 m/s | 2,069 kWh | $258 |
| February | 6.44 m/s | 1,762 kWh | $220 |
| March | 6.79 m/s | 2,169 kWh | $270 |
| April | 6.99 m/s | 2,217 kWh | $276 |
| May | 6.85 m/s | 2,203 kWh | $274 |
| June | 6.22 m/s | 1,756 kWh | $219 |
| July | 5.73 m/s | 1,503 kWh | $187 |
| August | 5.84 m/s | 1,570 kWh | $196 |
| September | 6.53 m/s | 1,942 kWh | $242 |
| October | 7.05 m/s | 2,329 kWh | $290 |
| November | 6.84 m/s | 2,126 kWh | $265 |
| December | 6.46 m/s | 1,962 kWh | $244 |
What a taller tower would buy
Measured at 10 m the wind in Ramsey County averages 5.23 m/s; at 50 m it is 7.24 m/s. That gives a shear exponent of 0.202, typical of ordinary open country. Going from 20 m to 50 m takes output from 19,827 to 28,741 kWh a year, 45% more, before counting the extra cost of the taller tower. Why tower height decides it explains the shear behind these numbers.
| Hub height | Average wind | Output | Payback |
|---|---|---|---|
| 20 m | 6.02 m/s | 19,827 kWh | 41 years |
| 30 m | 6.53 m/s | 23,629 kWh | 34 years |
| 40 m | 6.92 m/s | 26,476 kWh | 30 years |
| 50 m | 7.24 m/s | 28,741 kWh | 28 years |
Counties around Ramsey County
1 of the 6 closest counties is windier at turbine height; the windiest, Cavalier County, averages 6.57 m/s.
- Benson County, ND: 6.44 m/s, 22,964 kWh, payback 35 years (31 mi)
- Nelson County, ND: 6.53 m/s, 23,628 kWh, payback 34 years (34 mi)
- Cavalier County, ND: 6.57 m/s, 23,922 kWh, payback 34 years (37 mi)
- Towner County, ND: 6.36 m/s, 22,373 kWh, payback 36 years (37 mi)
- Eddy County, ND: 6.52 m/s, 23,554 kWh, payback 34 years (38 mi)
- Walsh County, ND: 6.37 m/s, 22,447 kWh, payback 36 years (47 mi)
Sun versus wind in Ramsey County
Ramsey County gets 3.87 kWh of sunshine per square metre a day on average. One kW of solar panels here would make roughly 1,130 kWh a year; one kW of the turbine above makes 2,363. This is one of the rare places where a kilowatt of turbine out-produces a kilowatt of panels, by 2.1 times. Panel output assumes an 80% system performance ratio. Wind or solar runs the same comparison for every county.
How this is worked out
Wind is NASA's Power climate record, the 2001-2025 average at 10 m and 50 m for the county's centre, carried to 30 m with this county's own measured wind shear and spread into hours with a Rayleigh distribution. The turbine is a generic 10 kW, 7 m rotor machine with 10% losses. Cost is $10,000 per kW installed with no tax credit, because the federal one ended in 2025. One county-centre number cannot see your hilltop or your tree line, so treat it as the starting point for a site survey, not a substitute. The full method and its weak spots are in how the numbers are made.